ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Setting the MAC Address Age
Use the following command to configure the MAC address aging timer:
Command Description
mac-addr set mac-age <age>
Sets the length of time, in seconds, that a
learned MAC address remains in the forwarding
table without being used (how long a learned
MAC address is allowed to remain idle before it
is deleted from the table)
Type the age in seconds from 10 to1000000.
Displaying MAC Address Aging Timer Information
Use the following commands to display the MAC address aging timer information:
Commands Description
mac-addr show mac-age
mac-addr show tbl
{
vlan <vlan_id> |
mac <mac_addr> |
port <port#> |
all vlan <vlan_id> mac <mac_addr>
}
The mac-addr show mac-age command
displays the current setting of the
MAC address aging timer.
The mac-addr show tbl command displays
the MAC address forwarding table. You can
browse the table by VLAN ID, MAC address,
port number, or all VLANs. Type one of the
following:
• vlan <vlan_id>—Type vlan and the
VLAN ID.
• mac <mac_addr>—Type mac and the
MAC address.
• port <port#>—Type port and the port
number.
• all vlan <vlan_id> mac <mac_addr>—
Type all vlan and the VLAN ID, and mac
and MAC address.
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 2-15