ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
The following shows the factory default IGMP snooping settings:
Feature Default Value
IGMP Snooping Globally Disabled
Group Address Filter Mode Forward all unregistered
IGMP Snooping—State Enabled
IGMP Snooping—Querier State Non-querier
IGMP Snooping—Robustness Variable 2
IGMP Snooping—Query Interval 125 seconds
IGMP Snooping—Max Response 10 seconds
Enabling IGMP Snooping
Use the following command to enable IGMP snooping:
Command Description
igmp enable {feature | vlan <vlan_id>}
Enables the switch to read IGMP packets being
forwarded through the switch in order to obtain
forwarding information from them and learn
which ports contain multicast members
Type one of the following in the command:
• feature—Type feature to enable IGMP
snooping globally on the GbE Interconnect
Switch.
• vlan <vlan_id>—Type vlan and the VLAN
ID to enable IGMP snooping on a specific
VLAN.
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 2-19