ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Disabling IGMP Snooping
Use the following command to disable IGMP snooping globally on the GbE Interconnect
Switch or on a specified VLAN:
Command Description
igmp disable {feature | vlan <vlan_id>}
Disables IGMP snooping globally on the GbE
Interconnect Switch or on a specified VLAN
Type one of the following in the command:
• feature—Type feature to disable IGMP
snooping globally on the GbE Interconnect
Switch.
• vlan <vlan_id>—Type vlan and the VLAN
ID to disable IGMP snooping on a specified
VLAN.
Setting IGMP Filter Mode for Processing Multicast Packets
Use the following command to set the IGMP filter mode for processing multicast packets:
Command Description
igmp set filter {all | unregistered | filter}
Sets IGMP filter mode for processing
multicast packets and the parameters
for VLAN-based IGMP snooping
Type one of the following IGMP filter
options in the command:
• all—Forwards all packets.
• unregistered—Forwards all
packets with unregistered group
addresses.
• filter—Filters all packets with
unregistered group addresses.
2-20 HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide