ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Deleting IGMP Snooping Settings for a VLAN
Use the following command to delete an entry in the IGMP snooping table for a given
VLAN:
Command Description
igmp delete vlan <vlanlist>
Deletes an entry in the IGMP snooping table for
a specified VLAN
Displaying IGMP Snooping Settings
Use the following command to display IGMP snooping settings:
Command Description
igmp show
{
filter |
vlan {* | <vlan_id>} |
status {* | <vlan_id>} |
dynamic-reg
}
Displays IGMP snooping settings for a specific
VLAN or VLANs
Type one of the following in the command:
• filter—Type filter to display the IGMP filter
mode.
• vlan—Displays a list of all current settings
for IGMP-enabled VLANs including IGMP
State, Age Out, and Querier State. Age Out
equals (Robustness Variable x Query
Interval) + Maximum Response Time. Type
vlan and one of the following:
• * —Type an asterisk (*) to display all
VLANs.
• <vlan_id>—Type the VLAN ID to
display the settings for a specified
VLAN.
• status—Displays the status for IGMP for all
VLANs or for one VLAN. Type status and
one of the following:
• * —Type an asterisk (*) to display the
status for all VLANs.
• <vlan_id>—Type the VLAN ID to
display the status for a specified VLAN.
• dynamic-reg—Type dynamic-reg to
display the Dynamic Group Registration
Table. This table displays filtering
information for VLANs configured into the
bridge by local or network management, or
learned dynamically. It specifies the set of
ports to which frames received on a VLAN
for this forwarding database, and containing
a specific group destination address, are
allowed to be forwarded.
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 2-23