ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Deleting a Trunk Group or a Port from a Trunk Group
Use the following command to delete a trunk group or member ports from an existing trunk
group:
Command Description
trunk delete
{
id <group_id> |
entry id <group_id> port <portlist>
}
Deletes either a trunk group or a port from a
trunk group
Type one of the following in the command:
• id <group_id>—Type id and the group ID
number of the trunk to delete.
• entry—Type entry and the following:
• id <group_id>—Type id and the
group ID number of the trunk.
• port <portlist>—Type port and the
port number or numbers to delete
from the trunk.
Enabling a Trunk Group
Use the following command to enable a trunk group:
Command Description
trunk enable id <group_id>
Enables the specified trunk group
Disabling a Trunk Group
Use the following command to disable a trunk group:
Command Description
trunk disable id <group_id>
Disables the specified trunk group
Clearing Trunk Utilization Counters
The GbE Interconnect Switch monitors the status of trunk utilization including the percentage
of total available bandwidth being used by the group, the percentage of packets transmitted,
and the percentage of packets being received per second. Use the following command to clear
the trunk utilization counters:
Command Description
trunk clear utilization
Clears the trunk utilization counters
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 2-31