ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Configuring the Trunk Load Sharing Algorithm Options
Use the following command to configure the load sharing algorithm options:
Command Description
trunk set load-sharing
{
src-mac |
des-mac |
both
}
Sets the manner in which load sharing decisions
will be determined
Type one of the following algorithm options in
the command:
• src-mac—Type src-mac to set port
selection based on the source MAC
address.
• des-mac—Type des-mac to set port
selection based on the destination MAC
address.
• both—Type both to set port selection
based on source and destination MAC
address.
Displaying Trunk Load-Sharing Algorithm
Use the following command to display the load-sharing algorithm:
Command Description
trunk show
{
id <group_id> |
utilization |
load-sharing
}
Displays the current information for trunk
groups, trunk utilization status, and load sharing
Type one of the following in the command:
• id <group_id>—Displays the settings for a
specific trunk group. Type id and the group
ID number of the trunk.
• utilization—Type utilization to display the
trunk utilization status including the
percentage of total available bandwidth
being used by the group, the percentage of
packets transmitted, and the percentage of
packets being received per second.
• load-sharing—Type load-sharing to
display the load sharing status.
2-32 HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide