ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Displaying Web Access Settings
Use the following command to display Web access settings.
Command Description
web show
Displays Web access settings
For example:
Configuring Backpressure Flow Control
Backpressure can be enabled to initiate flow control on the GbE Interconnect Switch ports.
When backpressure is enabled and there is incoming traffic congestion on a port, the
receiving port sends a request to the transmitting port. The transmitting port acknowledges
the request and stops sending packets for a random amount of time, before starting to send
again.
The following shows the factory default setting for backpressure flow:
Feature Default Value
Backpressure Disabled
Enabling Backpressure Flow Control
Use the following command to enable backpressure flow control:
Command Description
backpressure enable
Enables backpressure flow control on the GbE
Interconnect Switch
Disabling Backpressure Flow Control
Use the following command to disable backpressure flow control:
Command Description
backpressure disable
Disables backpressure flow control on the GbE
Interconnect Switch
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 2-37