ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Enabling Ports on a Per Port Basis
Use the following command to enable ports on a per port basis:
Command Description
port enable
{
port <portlist> |
security <portlist>
}
Enables ports on a per port basis. Disabled
ports do not send or receive any traffic. The
default is port enabled.
Disabling Ports or Port Security on a Per Port Basis
Use the following command to disable ports or port security on a per port basis:
Command Description
port disable
{
port <portlist> |
security <portlist>
}
Disables ports or port security on a per port
basis. Disabled ports do not send or receive any
traffic. The default is port enabled.
Type one of the following in the command:
• port <portlist>—Disables the port or ports.
Type port and the port number or numbers.
• security <portlist>—Disables the security
parameters for a port or ports. Type
security and the port number or numbers.
Clearing Current Port Statistics
Use the following command to clear the current port statistics:
Command Description
port clear
{
utilization port <portlist> |
error port <portlist> |
packet port <portlist>
}
Clears the utilization counters, error counters, or
packet counters for a specified port or ports
Type one of the following in the command:
• utilization port <portlist>—Clears the
utilization counters. Type utilization and
the port number or numbers.
• error port <portlist>—Clears the error
counters. Type error and the port number
or numbers.
• packet port <portlist>—Clears the packet
analysis counters. Type packet and the
port number or numbers.
2-46 HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide