ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Deleting Ports from the Ingress and Egress Bandwidth Tables
Use the following command to delete ports from the ingress and egress bandwidth tables:
Command Description
bandwidth delete port <portlist>
{
[ingress]
[egress]
}
Deletes a port from the ingress or egress
bandwidth table
Type the port number or numbers in the
command and one or both of the following
bandwidth table options:
• ingress—Deletes the port from the ingress
(receiving) bandwidth table.
• egress—Deletes the port from the egress
(transmitting) bandwidth table.
Modifying Ingress and Egress Bandwidth Parameters
Use the following command to modify ingress and egress bandwidth parameters:
Command Description
bandwidth modify port <portlist>
{
[ingress <bw_units>]
[egress <bw_units>]
}
Modifies a port to the restart ingress or egress
bandwidth table and configures the bandwidth
between 1 and 127 units of 117 Kbytes per
second. Zero (0) means disable bandwidth
control after restart.
Type the port number or numbers and one or
both of the following options:
• ingress <bw_units>—Type ingress and
the number of ingress bandwidth units. A
number between 1 and 127 is allowed.
• egress <bw_units>—Type ingress and the
number of egress bandwidth units. A
number between 1 and 127 is allowed.
2-50 HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide