ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Use the following command to configure global and per port STP settings on the GbE
Interconnect Switch:
Command Description
stp set
{
bridging
{
[delay <forward_delay>]
[time <hello_time>]
[age <max_age>]
[priority <prio>]
} |
params port <portlist>
{
[priority <port_prio>]
[cost <port_cost>]
}
}
Sets bridging parameters or sets the per port
priority or port cost parameters
Type bridging and the bridging parameters or
params and the parameter options in the
command.
• bridging—Sets the bridging parameters
forward delay, hello time, maximum age,
and priority. Type bridging and one or
more of the following:
• delay <forward_delay>—Type delay
and a value from 4 to 30 seconds.
• time <hello_time>—Type time and a
value from 1 to 10 seconds.
• age <max_age>—Type age and a
value from 6 to 40 seconds.
• priority <prio>— Type priority and a
value from 0 to 65,535. Zero (0)
indicates the highest priority.
• params port <portlist>—Sets the STP
priority and port cost for one port or a
series of ports. Type params port
<portlist> and one or both of the following:
• priority <port_prio>—Type priority
and a priority number from 0 to 255.
• cost <port_cost>—Type cost a port-
cost number from 1 to 65535.
2-56 HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide