ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Modifying Unicast Filter Actions
Use the following command to modify unicast filter actions:
Command Description
unicast modify
vlan <vlan_id>
mac <mac_addr>
{ [type {permanent | delete-on-reset}]
[port <port#>] }
Modifies unicast filter actions
Type the following in the command:
• vlan <vlan_id>—Type vlan and the VLAN
ID.
• mac <mac_addr>—Type mac and the
MAC address.
Type one or both of the following options:
• type {permanent | delete-on-reset}—
Type type and one of the following filter
types:
• permanent—The filter stays
permanently until reconfigured.
• delete-on-reset—The filter is deleted
when the port is reset.
• port <port#>—Type port and the port
number for which you want to make
modifications.
2-60 HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide