ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the GbE Interconnect Switch using the Command Line Interface
Deleting the Unicast Filter Actions
Use the following command to delete unicast filter actions:
Command Description
unicast delete
vlan <vlan_id>
mac {<mac_addr> | all}
Deletes unicast filter actions for one or all MAC
addresses on a VLAN
Type the following in the command:
• vlan <vlan_id>—Type vlan and the VLAN
ID.
• mac {<mac_addr> | all}—Type mac and
one of the following:
• <mac_addr>—Type the MAC address
to delete.
• all—Type all to delete all MAC
addresses.
Displaying Unicast Filter Actions
Use the following command to display the current unicast filter actions for a specified
VLAN:
Command Description
unicast show [vlan <vlan_id>]
Displays unicast filtering settings for all VLANs
or for a specific VLAN
This example shows the unicast filtering settings for a specific VLAN.
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference Guide 2-61