ProLiant BL p-Class GbE Interconnect Switch Menu-driven Interface Reference Guide
Table Of Contents
- HP ProLiant BL p-Class GbE Interconnect Switch Menu-driven Interface Reference Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Overview
- Chapter 2: Configuring the GbE Interconnect Switch using the Menu-driven Interface
- Overview
- Saving Changes
- Managing User Accounts
- Configuring the Remote Management IP Interface Settings
- Displaying Basic GbE Interconnect Switch Information
- Configuring Advanced GbE Interconnect Switch Features
- Configuring Port Settings
- Configuring Bandwidth
- Configuring Spanning Tree Protocol
- Configuring Static (Destination Address) Filtering Table
- Configuring VLANs
- Configuring GVRP
- Configuring IGMP Snooping
- Configuring Port Trunking
- Configuring Port Mirroring
- Configuring Thresholds for Broadcast, Multicast, DA-Unknown Storm Prevention or Monitoring
- Configuring Class of Service, Default Port Priority, and Traffic Class
- Configuring Port Security
- Configuring Priority MAC Addresses
- Configuring GbE Interconnect Switch Serial Port
- Configuring GbE Interconnect Switch Date and Time
- Monitoring GbE Interconnect Switch Functions
- Configuring SNMP/RMON Manager
- Using System Utilities
- Rebooting the GbE Interconnect Switch
- Logging Out
- Index
1
Overview
Introduction
In addition to the command line interface (CLI) and Web-based interface, the ProLiant BL
p-Class GbE Interconnect Switch supports a menu-driven interface that allows you to set up
and control the GbE Interconnect Switches. The menu-driven interface can be accessed either
with an ordinary terminal (or terminal emulator) or over the network using the TCP/IP Telnet
protocol. You can use the menu-driven interface to perform basic network management
functions and to configure the GbE Interconnect Switches for management using an
SNMP-based network management system.
Additional References
Additional information about installing and configuring the interconnect switch is available in
the following guides, which are located on the ProLiant BL p-Class GbE Interconnect Switch
Management System Utilities and User Documentation CD.
•
•
•
HP ProLiant BL p-Class GbE Interconnect Switch User Guide
HP ProLiant BL p-Class GbE Interconnect Switch Command Line Interface Reference
Guide
HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide
Connecting to the GbE Interconnect Switches
You can access the menu-driven interface by connecting the GbE Interconnect Switch to a
VT100-compatible terminal or a computer running an ordinary terminal emulator program
(for example, the terminal program included with the Windows® operating system) using an
RS-232C serial cable.
HP ProLiant BL p-Class GbE Interconnect Switch Menu-driven Interface Reference Guide 1-1