ProLiant BL p-Class GbE Interconnect Switch Menu-driven Interface Reference Guide
Table Of Contents
- HP ProLiant BL p-Class GbE Interconnect Switch Menu-driven Interface Reference Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Overview
- Chapter 2: Configuring the GbE Interconnect Switch using the Menu-driven Interface
- Overview
- Saving Changes
- Managing User Accounts
- Configuring the Remote Management IP Interface Settings
- Displaying Basic GbE Interconnect Switch Information
- Configuring Advanced GbE Interconnect Switch Features
- Configuring Port Settings
- Configuring Bandwidth
- Configuring Spanning Tree Protocol
- Configuring Static (Destination Address) Filtering Table
- Configuring VLANs
- Configuring GVRP
- Configuring IGMP Snooping
- Configuring Port Trunking
- Configuring Port Mirroring
- Configuring Thresholds for Broadcast, Multicast, DA-Unknown Storm Prevention or Monitoring
- Configuring Class of Service, Default Port Priority, and Traffic Class
- Configuring Port Security
- Configuring Priority MAC Addresses
- Configuring GbE Interconnect Switch Serial Port
- Configuring GbE Interconnect Switch Date and Time
- Monitoring GbE Interconnect Switch Functions
- Configuring SNMP/RMON Manager
- Using System Utilities
- Rebooting the GbE Interconnect Switch
- Logging Out
- Index
Configuring the GbE Interconnect Switch using the Menu-driven Interface
Rebooting the GbE Interconnect Switch
The GbE Interconnect Switch reboot options are:
•
•
•
•
Reboot—Restarts the GbE Interconnect Switch. Any configuration settings not saved
using Save Changes from the main menu are lost. The GbE Interconnect Switch
configuration is restored to the last configuration saved in NVRAM.
Save Configuration & Reboot—Saves the configuration to NVRAM (identical to using
Save Changes) and then restarts the GbE Interconnect Switch.
Reboot & Load Factory Default Configuration—Restarts the GbE Interconnect Switch
using the default factory configuration. All user-defined configuration data is lost.
Reboot & Load Factory Default Configuration Except IP Address—Restarts the
GbE Interconnect Switch using the default factory configuration, except the user-
configured IP address, which is retained. All other configuration data is lost. If you want
your IP address to default from DHCP or BOOTP, do not choose this option.
NOTE: Refer to Appendix D in the HP ProLiant BL p-Class GbE Interconnect Switch User Guide for a
list of factory default settings.
To reboot the GbE Interconnect Switch from the console:
1. Highlight Reboot on the main menu.
2. Press the Enter key. The following menu is displayed.
2-70 HP ProLiant BL p-Class GbE Interconnect Switch Menu-driven Interface Reference Guide
2605-001 Last Saved On: 2/3/03 1:22 PM