ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Overview
After the configuration settings have been saved to NVRAM, they become the default
settings for the GbE Interconnect Switch. These settings are then used every time the GbE
Interconnect Switch is rebooted.
IMPORTANT: After saving your final configuration, HP highly recommends that you save the
configuration image to TFTP server storage. Refer to the “Uploading a Configuration File to TFTP
Server” section in Chapter 2 for more information.
Connecting using the Web-based Interface
Once the IP address has been set on the GbE Interconnect Switch, you can use the Web-based
interface to connect to the switch.
To use the Web-based interface do the following:
1. Start a Web browser, for example, Microsoft Internet Explorer version 5.5 or higher or
Netscape Navigator version 6.1 or higher.
2. Type the IP address you have defined for the GbE Interconnect Switch in the browser
address bar. The URL in the address bar should be similar to:
http://10.24.22.8.
3. Press the Enter key. The Account Login screen is displayed.
1-6 HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide