ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
To configure port settings:
1. Select Port Configuration from the Configuration menu. The following screen is
displayed.
2. Select the port you want to configure in the Port field. The port name displays in the
Port Name field.
3. Select Enabled or Disabled in the State field. If you select Disabled, devices connected
to that port cannot use the GbE Interconnect Switch, and the switch purges their
addresses from its address table after the MAC address aging time elapses.
2-12 HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide