ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
Configuring the Restart Ingress Bandwidth Settings
To configure the restart ingress bandwidth settings for a port:
1. Select Restart Ingress Bandwidth from the Port Bandwidth menu. The following
screen is displayed.
2. Select the desired port in the Port Num field.
3. Type a number between 1 and 127 in the Ingress Bandwidth (1–127 Units) field.
4. Click Apply.
5. Select Restart System from the Maintenance menu.
6. Select Yes to save the settings.
7. Click Restart. The system reboots and saves your settings.
NOTE: To delete an entry, click the icon in the Delete column on the Ingress Bandwidth
Setup Table.
Displaying the Current Ingress Bandwidth Table
To display the current ingress bandwidth table, select Current Ingress Bandwidth from the
Port Bandwidth menu. The following screen is displayed.
Current Ingress Bandwidth Table is a read-only screen displaying current ingress
bandwidth information.
HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide 2-31