ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
Configuring the Restart Egress Bandwidth Settings
To configure egress bandwidth for a specific port:
1. Select Restart Egress Bandwidth from the Port Bandwidth menu. The following
screen is displayed.
2. Select the desired port in the Port Num field.
3. Type a number between 1 and 127 in the Egress Bandwidth (1–127 Units) field.
4. Click Apply to save the change or addition.
5. Select Restart System from the Maintenance menu.
6. Select Yes to save the settings.
7. Click Restart. The system reboots and saves your settings.
NOTE: To delete an entry, click the icon in the Delete column on the Egress Bandwidth
Setup Table.
Displaying the Current Egress Bandwidth Table
To display the current egress bandwidth table, select Current Egress Bandwidth from the
Port Bandwidth menu. The following screen is displayed.
Current Egress Bandwidth Table is a read-only screen displaying current egress bandwidth
information.
2-32 HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide