ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
Setting Port Priority
To set the port priority:
1. Select Port Priority from the Configuration menu. The following screen is displayed.
2. Select the appropriate port in the From and To fields.
3. Type the priority in the Priority (0–7) field.
4. Click Apply to save the changes.
IMPORTANT: To save the configuration settings permanently, you must enter them into NVRAM
using the Save Changes option on the Maintenance menu. Refer to the section, “Saving
Changes,” earlier in this chapter.
2-34 HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide