ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
Setting Traffic Class
To set the traffic class:
1. Select Class of Traffic from the Configuration menu. The following screen is displayed.
The Configure Class of Traffic window allows you to configure traffic class priority by
specifying the class value, from 0 to 3, of the eight levels of priority of the GbE
Interconnect Switch.
2. Select the class value for each priority.
3. Click Apply to save the changes.
IMPORTANT: To save the configuration settings permanently, you must enter them into NVRAM
using the Save Changes option on the Maintenance menu. Refer to the section, “Saving
Changes,” earlier in this chapter.
HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide 2-35