ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
Setting the Current Time or Enabling SNTP
To set the current time or enable SNTP:
1. Select Time Settings from the Configuration menu.
2. Select Current Time Settings. The following screen is displayed.
The Current Time screen allows you to set the current time and date, enable SNMP, and
set the SNMP parameters. The screen is divided into the following three sections:
— Current Time: Status displays the following:
— System Boot Time—The date and time when the last boot occurred
— Time Source—The method in which the GbE Interconnect Switch gets the
current time information: System Clock, Primary SNTP Server, or Secondary
SNTP Server
— Current Time: SNTP Settings allows you to configure SNTP service:
— SNTP State—Select Disabled or Enabled. The default is disabled.
— SNTP Primary Server—Type the IP address for the primary SNTP server.
— SNTP Secondary Server— Type the IP address for the secondary SNTP server,
or leave as 0.0.0.0 to disable.
— SNTP Poll Interval in Seconds—Type the polling interval (in seconds) for
requesting the time from the server. A number from 30 to 99999 is allowed. The
default is 720.
HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide 2-41