ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
— Current Time: Set Current Time allows you to manually set the current date and
time. This screen is grayed out if SNTP state is enabled. To manually set the date and
time, enter the following:
— Year—Select the current year.
— Month—Select the current month.
— Day—Select of the current day of the month.
— Time in HH MM—Select the current time in hh mm format. Leading zeros (0)
are not required.
3. Click Apply after making changes to the settings.
IMPORTANT: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,” earlier in
this chapter.
Setting the Time Zone and Daylight Saving Time
To set the time zone and daylight saving time (DST):
1. Select Time Settings from the Configuration menu.
2. Select Time Zone and DST. The following screen is displayed:
2-42 HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide