ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
The Trunk Utilization window displays the port trunking groups and allows you to view
graphs of three items for an individual port trunking group: the percentage of total available
bandwidth being used by the group, the percentage of packets transmitted, and the percentage
of packets being received per second.
The following information is displayed:
•
•
•
•
•
•
•
•
•
•
ID—Identifies the group ID for the port trunking group.
Group Name—Identifies the group name for the port trunking group.
Member Ports—Identifies ports that are members of the trunking group.
State—Identifies if the port trunking group is enabled or disabled.
Trunk Utilization View—Click View to view a line graph for the trunk utilization
Rx_Util—Displays the percentage of packets received.
Tx_Util—Displays the percentage of packets received.
R&Tx_Util—Displays the percentage of total available bandwidth being used by the
trunking group.
Time Interval—Select the frequency at which the information on the screen is refreshed.
The setting can be between 1s and 60s, where “s” stands for seconds. The default value
is one second.
Record Number—Select the number of times the GbE Interconnect Switch will be
polled. The setting can be between 20 and 200. The default value is 20.
HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide 2-59