ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
• Status—Displays the current status of the VID.
•
•
•
•
•
•
•
•
Creation time since switch power up—Displays the hours, minutes, and seconds since
the GbE Interconnect Switch was last rebooted.
Current Egress Ports—Displays the current egress ports on the VLAN.
Current Untagged Ports—Displays the current untagged ports on the VLAN.
Prev—Click to display the previous VLAN.
Next—Click to display the next VLAN.
Using System Utilities
TFTP services allow the GbE Interconnect Switch firmware to be upgraded by downloading a
new firmware file from a TFTP server to the GbE Interconnect Switch. A configuration file
can also be loaded into the GbE Interconnect Switch, and GbE Interconnect Switch settings
can be saved to a TFTP server. In addition, the history log of the GbE Interconnect Switch
can be uploaded from the GbE Interconnect Switch to a TFTP server.
Please note that TFTP server software must be running on the management station for the
TFTP services to function. TFTP software is available in the GbE Interconnect Switch
utilities package.
The TFTP screens share the following common fields:
TFTP Server IP Address—Identifies the IP address of the TFTP server. This server is
common for all TFTP services. The default TFTP server is 0.0.0.0.
TFTP Server Port Address—Identifies the port number on which the TFTP server is
listening. The default is 69. The valid values are 69 and 1024-65535.
File Name—Identifies the relative path based on the TFTP servers base path. The history
log path and firmware file path are unique. The path for the download and upload
configuration options is the same.
HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide 2-63