ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Configuring the GbE Interconnect Switch using the Web-based Interface
Resetting the GbE Interconnect Switch Configuration to
Factory Defaults
To reset the GbE Interconnect Switch configuration to the factory defaults:
1. Select Factory Reset from the Maintenance menu. The following screen is displayed.
2. Select Yes or No to keep the system IP address. If you want your IP address to default
from DHCP or BOOTP, select No.
3. Click Reset to Factory Default to reset the GbE Interconnect Switch.
HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide 2-69