ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Index
A E
accounts, user 2-2 egress bandwidth settings 2-32
active switch graphic 2-47 error packets, monitoring 2-53
advanced settings 2-9
auto-logout 2-9
F
factory default reset 2-69
B
firmware upgrades 2-64
backpressure 2-11
bandwidth, configuring 2-30, 2-31
G
basic settings 2-7
grounding v
Bootstrap Protocol (BOOTP)
grounding plug v
IP address assignment 1-4, 2-5
group address filter mode 2-10
broadcast storm
GVRP (GARP VLAN Registration Protocol)
settings 2-10, 2-28, 2-30
configuring threshold 2-24, 2-33
browsers 1-1
H
C
help resources vi
Class of Service (CoS) 2-33
history, switch 2-66
class of traffic 2-35
HP authorized reseller vi
community names, SNMP 2-45
HP ProLiant BL p-Class GbE Interconnect
Switch 1-1
component-level repairs v
configuration 1-1
HTTP protocol 1-1
connecting procedures 1-2
connection timeout 2-70
I
current egress bandwidth settings 2-32
current ingress bandwidth settings 2-31
IGMP (Internet Group Management Protocol)
snooping
D
advanced settings 2-10
configuring 2-18
date, configuring 2-40
monitoring 2-61
DA-unknown storm, configuring threshold 2-24,
2-33
overview 2-17
ingress bandwidth settings 2-31
daylight saving time, configuring 2-42
ingress filtering 2-28
default settings
ingress filtering of ports 2-29
port priority 2-34
IP addresses 1-6, 2-4
resetting factory defaults 2-69
DHCP (Dynamic Host Configuration Protocol)
L
IP address assignment 1-4, 2-5
Dynamic Group Registration Table 2-62
login procedures
initial logon 1-3
logout procedures 2-70
HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide Index-1