ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide

Overview
Logging On to the GbE Interconnect Switch
When you log on to a GbE Interconnect Switch, the following screen is displayed.
IMPORTANT: The GbE Interconnect Switch does not have any initial user names or passwords set.
HP recommends that after logging on, you create at least one Root-level user as the switch
administrator. (Refer to Table 2-1 in Chapter 2 for an explanation of user privileges.) If you forget your
password after it has been set up, call HP Customer Support to get the MAC-based backdoor
password.
To log on for the first time:
1. Leave the Username field blank and press the Tab key.
2. Leave the Password field blank and press the Enter key. The main menu for the GbE
Interconnect Switch is displayed.
NOTE: After user accounts are created, subsequent users will enter their user name and
password, then press the Enter key.
3. The main menu displays the major categories for switch management. Highlight
Configuration on the main menu.
HP ProLiant BL p-Class GbE Interconnect Switch Web-based Interface Reference Guide 1-3