BladeSystem p-Class SAN Connectivity Kit Quick Setup Instructions

OctalFC Interconnect Module LEDs
NOTE: The following LED assignments apply to ProLiant BL20p series
servers in non-enhanced backplane
enclosures only. The LEDs are
non-functional for p-Class server enclosures with enhanced backplane
components that support hi
gh-density blade servers.
Item Description
Status
1 LED for Fibre Channel port 1 Green = Link
Off = No Link
2 LED for Fibre Channel port 2 Green = Link
Off = No Link
3 LED for Fibre Channel port 3 Green = Link
Off = No Link
4 LED for Fibre Channel port 4 Green = Link
Off = No Link
5 LED for Fibre Channel port 5 Green = Link,
Off = No Link
6 LED for Fibre Channel port 6 Green = Link
Off = No Link
7 LED for Fibre Channel port 7 Green = Link
Off = No Link
8 LED for Fibre Channel port 8 Green = Link
Off = No Link
GbE2 Interconnect Sw
itch Front Panel SAN
LED
Description Status
SAN LED
Green = OctalFC Interconnect Module and Fibre
Channel Signal Conditioning Card match
Amber = OctalFC Interconnect Module and Fibre
Channel Signal Conditioni
ng Card do not match
Off = No OctalFC Interconnect Module installed
Regulatory Notice
European Union Notice
Products bearing the CE marking
comply with the
EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued
by the Commission of the European Community and if this product
has telecommunicat
ion functionality, the R&TTE Directive
(1999/5/EC). Compliance with these directives implies conformity
to the following European Norms (in parentheses are the
equivalent international standards and regulations):
• EN 55022 (CISPR 22) – Electromagnetic Interference
• EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11) – Electromagnetic
Immunity
• EN61000-3-2 (IEC61000-3-2) – Power Line Harmonics
• EN61000-3-3 (IEC61000-3-3) – Power Line Flicker
•
EN 60950 (IEC 60950) – Product Safety
BSMI Notice