ProLiant BL p-Class GbE2 Interconnect Switch Application Guide

OSPF 122
Example 1: Simple OSPF domain (BBI example)
1. Configure IP interfaces on each network that will be attached to OSPF areas:
• IF 1
IP address = 10.10.7.1
Subnet mask = 255.255.255.0
• IF 2
IP address = 10.10.12.1
Subnet mask = 255.255.255.0
a. Click the Configure context button.
b. Open the IP Interfaces folder, and select Add IP Interface.
c. Configure an IP interface. Enter the IP address, subnet mask, and enable the interface.
d. Click Submit.
2. Apply, verify, and save the configuration.