ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 105
Configuring the switch
Introduction
The GbE2 Interconnect Switch BBI can be used to view and change switch configuration parameters. The same
configuration parameters that are available through the switch’s command-line interface are present on the BBI
configuration forms.
The following provides a basic outline for GbE2 Interconnect Switch configuration. You should first be familiar
with configuration as covered in the HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference
Guide.
IMPORTANT: You must be logged in using the administrator account in order to change GbE2 Interconnect
Switch configuration settings.
Configuration steps
Follow these basic steps for viewing or configuring GbE2 Interconnect Switch parameters:
1. Select the Configure context button in the toolbar.
2. Select a feature icon in the navigation window. For example: