ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 110
SNMP controls
To display the following form, select System > General.
The following table describes the Switch Management Processor Configuration (SNMP) controls:
Table 89 Switch Management Processor Configuration (SNMP) controls
Control Description
SNMP System Name Configures the name for the system. The name can have a maximum of 32
characters.
SNMP Location Configures the name of the system location. The location can have a
maximum of 32 characters.
SNMP Contact Configures the name of the system contact. The contact can have a
maximum of 32 characters.
SNMP Read Community String Configures the SNMP read community string. The read community string
controls SNMP “get” access to the switch. It can have a maximum of 32
characters. The default read community string is public.
SNMP Write Community String Configures the SNMP write community string. The write community string
controls SNMP “set” and “get” access to the switch. It can have a
maximum of 32 characters. The default write community string is private.
SNMP state machine timeout (1-30 minutes) Sets the timeout value for the SNMP state machine.