ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 115
The following table describes Switch TACACS+ Configuration controls:
Table 93 Switch TACACS+ Configuration controls
Control Description
Primary Tacacs+ IP Address Configures the primary TACACS+ server address.
Secondary Tacacs+ IP Address Configures the secondary TACACS+ server address.
Tacacs+ port (1-65000) Configures the number of the TCP port to be configured, between 1 and
65000. The default is 49.
Tacacs+ timeout (4-15) Configures the amount of time, in seconds, before a TACACS+ server
authentication attempt is considered to have failed. The default timeout is
5 seconds.
Tacacs+ retries (1-3) Configures the number of failed authentication requests before switching
to a different TACACS+ server. The default retry count is 3 requests.
Enable/Disable Tacacs+ Server Enables or disables the Tacacs+ server.
Enable/Disable Tacacs+ Backdoor for telnet Enables or disables the Tacacs+ backdoor for telnet. Telnet also applies
to SSH/SCP connections.
Enable/Disable Tacacs+ new privilege level
mapping
Enables or disables TACACS+ privilege-level mapping.
The default value is disabled.
Tacacs+ Secret Configures the shared secret (up to 32 characters) between the switch
and the TACACS+ server.
Secondary Tacacs+ Server Secret Configures the secondary shared secret (up to 32 characters) between the
switch and the TACACS+ server.
Tacacs+ User Mappings Configuration Maps a TACACS+ privilege level to a GbE2 user level, as follows:
Remote Privilege
Enter a TACACS+ privilege level (0-15)
Local Privilege
Select the corresponding GbE2 user level.
NTP Configuration
To display the following form, select System > NTP.
This form enables you to synchronize the switch clock to a Network Time Protocol (NTP) server. By default, this
option is disabled.