ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 123
Switch Port Configuration
To display the following form, go to the Switch Ports Configuration form. Select a Switch Port number.
This form allows you to configure settings for individual switch ports.
The following table describes the Switch Port Configuration controls:
Table 99 Switch Port Configuration controls
Control Description
Switch Port State Enables or disables the port.
RMON Instrumentation Enables or disables Remote Monitoring for the port. RMON must be
enabled for RMON statistics and history sampling to function.
VLAN Tagging Disables or enables VLAN tagging for this port. It is disabled by default.
PVID Tagging Disables or enables VLAN tag persistence. When disabled, the VLAN tag
is removed from packets whose VLAN tag matches the port PVID. The
default value is enabled.
Port STP Turns Spanning Tree On or Off for this port.
Default Port VLAN ID (1-4095) Sets the default VLAN number which will be used to forward frames
which are not VLAN tagged.
The default number is 1.