ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 124
Table 99 Switch Port Configuration controls
Control Description
Flow Control Sets the flow control. The choices include:
• Receive flow control
• Transmit flow control
• Both receive and transmit flow control (default)
• No flow control
Autonegotiation Enables or disables auto negotiation for the port.
Speed Sets the link speed. Not all options are valid on all ports. The choices
include:
• “Any,” for automatic detection (default)
• 10 Mbps
• 100 Mbps
• 1000 Mbps
Duplex Sets the operating mode. The choices include:
• “Any,” for auto negotiation (default)
• Full-duplex
• Half-duplex
Enable/Disable sending Link UP/Down Trap Enables or disables the sending of SNMP link up and link down traps.
The default setting is enabled.
Port Name Sets a name for the port. The assigned port name appears next to the
port number on some information and statistics screens.
Multicast Threshold Enables or disables multicast threshold limit.
Limits the number of multicast packets to the specified value. If disabled
(
dis), the port forwards all multicast packets.
Multicast Threshold Rate (0-262143) Configures the threshold rate for multicast packets, in packets per second.
Broadcast Threshold Enables or disables broadcast threshold limit.
Limits the number of broadcast packets to the specified value. If disabled
(
dis), the port forwards all broadcast packets.
Broadcast Threshold Rate (0-262143) Configures the threshold rate for broadcast packets, in packets per
second.
Destination Look Up Fail Threshold Enables or disables threshold limit for destination lookup failures.
Limits the number of unknown unicast packets to the specified value. If
disabled (
dis), the port forwards all unknown unicast packets.
Destination Lookup Fail Threshold Rate (0-
262143)
Configures the threshold rate for destination lookup failures, in packets
per second.
802.1p Port Priority (0-7) Configures the port’s 802.1p priority level.