ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 129
Switch Port Remark Configuration
To display the following form, go to the Switch Port Configuration form. Select an ACL remark number.
The following table describes the Switch Port Remark Configuration controls:
Table 102 Switch Port Remark Configuration controls
Control Description
Set in profile update method Defines the method used to update 802.1p priority updates, as follows:
• User defined – Sets the 802.1p priority for In-Profile packets based on the
configured value.
• Use TOS precedence – Maps the TOS (Type of Service) priority to 802.1p
priority for In-Profile packets.
• Disabled – Disables 802.1p priority mapping for In-Profile packets.
Set in profile user update priority Defines 802.1p value. The value is the priority bits information in the packet
structure.
Set in profile update DSCP enable Enables or disables DSCP updates for In-Profile packets.