ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Browser-based interface basics 13
Context buttons
The toolbar is used for setting the context for your actions in the application. There are three context buttons:
Table 1 Context buttons
Button Description
Configure When selected, you can access and alter the GbE2 Interconnect Switch configuration forms.
Select an item in the navigation window to display the desired configuration form in the forms
window.
Note: This context is only available when you are logged in as an administrator.
Statistics When selected, you can view information about GbE2 Interconnect Switch performance.
Select an item in the navigation window to display the desired statistics in the forms window.
Dashboard This context button is selected by default when the BBI is first activated. When selected, basic
GbE2 Interconnect Switch information and status can be viewed in the forms window. Select
an item in the navigation window to display the desired dashboard information in the forms
window.
First click a context button, and then click an item in the navigation window. When a context button is selected,
the button is highlighted as a reminder of the current context mode.
Commands
The following general commands are available on the toolbar:
Table 2 Toolbar commands
Command Description
Apply Pending configuration changes do not take effect until you select the Apply command. Once applied,
all changes (except enabling/disabling Spanning Tree Protocol) take effect on the GbE2 Interconnect
Switch immediately. If you do not save the changes, however, they will be lost the next time the switch
is rebooted.
Save Writes applied configuration changes to non-volatile flash memory on the GbE2 Interconnect Switch
(with the option of not overlaying the current backup).
Revert Removes pending configuration changes between Apply commands. Use this command to restore
configuration parameters set since last Apply command.
Diff Shows any pending configuration changes.
Dump Writes current GbE2 Interconnect Switch configuration to the screen. Configuration information is
displayed with parameters that have been changed from default values.
Show Log Opens a new Web-browser window for displaying the 100 most recent GbE2 Interconnect Switch log
messages. Close the log browser when finished.
Help Opens a new Web-browser window for displaying the basic online help information. Close the help
browser when finished.
Quit Logs off the GbE2 Interconnect Switch and exits the BBI.