ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 148
• All ports in a trunk must have the same configuration for speed, flow control, and autonegotiation.
• Trunking from other devices must comply with Cisco
® EtherChannel® technology.
• By default, port 17 and 18 are trunked.
The following table describes the Switch Trunk Group Configuration controls:
Table 121 Switch Trunk Group Configuration controls
Control Description
Trunk State Enables or disables the Trunk Group.
Ports Available Lists the ports that you can add to the Trunk Group.
Ports added to Trunk Lists the ports that are members of the Trunk Group.
Select a port number in the Ports Available list, and click Add to add the port to the Trunk Group.
Select a port number in the Ports added to Trunk list, and click Remove to remove the port from the
Trunk Group.
Trunk Hash Configuration
To display the following form, select Layer 2 > Trunk Hash.
The following table describes the Layer 2 Trunk Hash Configuration controls:
Table 122 Layer 2 Trunk Hash Configuration controls
Control Description
Smac Enable or disable trunk hashing on the source MAC.
Dmac Enable or disable trunk hashing on the destination MAC.
Sip Enable or disable trunk hashing on the source IP.
Dip Enable or disable trunk hashing on the destination IP.