ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 149
LACP Configuration
To display the following form, select Layer 2 > LACP.
The following table describes the Switch LACP Configuration controls:
Table 123 Switch LACP Configuration controls
Control Description
LACP System Priority (1-65535) Defines the priority value (1 through 65535) for the switch. Lower numbers provide
higher priority. The default value is 32768.
Timeout time Defines the timeout period before invalidating LACP data from a remote partner.
Choose
short (3 seconds) or long (90 seconds). The default value is long.
NOTE: HP recommends that you use a timeout value of long, to reduce LACPDU processing. If your switch’s CPU
utilization rate remains at 100% for periods of 90 seconds or more, consider using static trunks instead of LACP.