ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 157
The following table describes IP Interfaces Configuration controls:
Table 132 IP Interfaces Configuration controls
Control Description
Search Range To search for an IP Interface, enter a range of IP Interface numbers in the From and To fields.
Search Options To focus the search for an IP Interface, enter optional search parameters:
• IP Address
• Subnet Mask
• VLAN ID number
• IP Interface State
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for IP Interfaces specified in the Search range that meet any of the criteria
entered.
• and: Search for IP Interfaces specified in the Search range that meet all of the criteria
entered.
Click Search to display IP Interfaces that fit the range and meet the criteria entered.
IP Interface Configuration
To display the following form, go to the IP Interfaces Configuration form. Select an IP Interface number, or open
the IP Interfaces folder and click Add IP Interface.
The GbE2 Interconnect Switch can be configured with up to 255 IP interfaces. Each IP interface represents the
GbE2 Interconnect Switch on an IP subnet on your network. The Interface option is disabled by default.
The following table describes the IP Interface Configuration controls:
Table 133 IP Interface Configuration controls
Control Description
IP Interface Identifier (1-255) Selects an IP interface to configure.
IP Address Configures the IP address of the switch interface using dotted decimal notation.
Enabled? Enables or disables this IP interface.
Subnet Mask Configures the IP subnet address mask for the interface using dotted decimal
notation.
Broadcast Address Configures the IP broadcast address for the interface using dotted decimal notation.
VLAN Membership ID (1-4095) Configures the VLAN number for this interface. Each interface can belong to one
VLAN, although any VLAN can have multiple IP interfaces in it.