ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 165
The following table describes the Access Path Configuration controls:
Table 142 Access Path Configuration controls
Control Description
Access Path Identifier (1-8) Assigns the access path number.
AS number (0-65535, 0=none) Sets the Autonomous System filter’s path number.
Action Permits or denies Autonomous System filter action.
Enabled? Enables or disables the Autonomous System filter.
Default Gateways Configuration
To display the following form, select IP Menu > Default Gateways (click the underlined text, not the folder).
This form summarizes default gateway parameters.
The following table describes the Default Gateways Configuration controls:
Table 143 Default Gateways Configuration controls
Control Description
Search Range To search for a Default Gateway, enter a range of Gateway numbers in the From and To
fields.
Search Options To focus the search for a Default Gateway, enter optional search parameters:
• IP Address
• Subnet Mask
• Default Gateway State
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for Default Getaways specified in the search range that meet any of the
criteria entered.
• and: Search for Default Getaways specified in the search range that meet all of the
criteria entered.
Click Search to display Default Getaways that fit the range and meet the criteria entered.