ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 171
Static Multicast Router Configuration for Port
To display the following form, go to the IGMP Static Multicast Router Configuration form. Select an Mrouter Port
number, or open the IGMP Static Mrouter folder and click Add Mrouter.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is
disabled for that VLAN.
The following table describes the Static Multicast Router Configuration for Port controls:
Table 148 Static Multicast Router Configuration for Port controls
Control Description
Mrouter Port ID Selects a port on which the static multicast router is connected.
NOTE: Port number must be an external port (17-24).
Vlan ID Selects a VLAN on which the static multicast router is connected.
IGMP Version? Configures the IGMP version (1 or 2) of the multicast router.
OSPF General Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > General.