ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 172
The following table describes the OSPF General Configuration controls:
Table 149 OSPF General Configuration controls
Control Descriptions
Globally Enable OSPF? Enables or disables OSPF.
External LSDB Limit (0-2000) Sets the link state database limit. Enter zero (0) to indicate that there is no
limit.
Default Route Metric (1-16777215, 0=none) Sets one default route among multiple choices in an area.
Default Route Metric Type Sets the default-route metric type. Enter none to indicate that there is no
default.
OSPF MD5 Key Configuration
To display the following form, go to the OSPF General Configuration form. Click Add OSPF Mdkey.
The following table describes the OSPF MD5 Key Configuration controls:
Table 150 OSPF MD5 Key Configuration controls
Control Descriptions
ID Displays a numeric identifier for the MD5 authentication key.
MD5 Key Assigns a string to the MD5 authentication key.
OSPF Areas Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Areas (click the underlined text, not
the folder).
This form provides a summary of the state of OSPF areas. Select an area number to view the OSPF Area
Configuration form.