ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 177
OSPF Virtual Links Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Virtual Links (click the underlined
text, not the folder).
This form provides a summary of the state of OSPF virtual links.
OSPF Virtual Link Configuration
To display the following form, go to the OSPF Virtual Links Configuration form. Select a virtual link number, or
open the OSPF Virtual Links folder and click Add OSPF Virtual Link.
The following table describes the OSPF Virtual Link Configuration controls:
Table 155 OSPF Virtual Link Configuration controls
Control Descriptions
Virtual Link Identifier (1-3) Assigns a numeric identifier to the virtual link.
Area Number (0-2) Defines the area index used by the virtual link.
Enabled? Enables or disables the OSPF virtual link.
Hello Interval (1-65535 sec) Displays the authentication parameters of a hello packet, which is set to be in an interval
of seconds.