ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 178
Table 155 OSPF Virtual Link Configuration controls
Control Descriptions
Dead Interval (1-65535 sec) Displays the health parameters of a hello packet, which is set to be in an interval of
seconds. Default is 40 seconds.
Transmit Delay (1-3600 sec) Displays the delay in transit in seconds. Default is one second.
Retransmit Interval (1-3600 sec) Displays the retransmit interval in seconds. Default is five seconds.
Virtual Neighbor Router ID Displays the router ID of the virtual neighbor. Default is 0.0.0.0
Authentication Key Displays the password (up to eight characters) for each virtual link. Default is none.
MD5 Key ID (0-255) Sets MD5 key ID for each virtual link. Default is 0 (none).
OSPF Hosts Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Hosts (click the underlined text, not
the folder).
The following table describes OSPF Hosts Configuration controls:
Table 156 OSPF Hosts Configuration controls
Control Description
Search Operation To focus the search for an OSPF host, enter search parameters:
• Host ID
• IP address and subnet mask
• Area number
• State
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for OSPF hosts specified in the Search range that meet any of the criteria
entered.
• and: Search for OSPF hosts specified in the Search range that meet all of the criteria
entered.
Click Search to display OSPF hosts that fit the range and meet the criteria entered.