ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 184
RIP General Configuration
To display the following form, select Layer 3 > Routing Information Protocol > General.
The following table describes the RIP Interface Configuration controls:
Table 162 RIP Interface Configuration controls
Control Descriptions
Globally Enable RIP? Globally enables or disables RIP.
Update Period (1-120 sec) Configures the time interval for sending for RIP table updates, in seconds.
The default value is 30 seconds.
Virtual Routers Configuration
To display the following form, select Layer 3 > Virtual Router Redundancy Protocol > Virtual Routers (click the
underline text, not the folder).