ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 188
The following table describes the VRRP Interface Configuration controls:
Table 166 VRRP Interface Configuration controls
Control Descriptions
IP Interface (1-255) Defines the IP interface.
Authentication? Defines the type of authentication that will be used: none (no authentication), or
password (password authentication).
Password Defines a plain text password up to eight characters long. This password will be added to
each VRRP packet transmitted by this interface when password authentication is chosen
(see
Authentication above).
VRRP General Configuration
To display the following form, select Layer 3 > Virtual Router Redundancy Protocol > General.
The following table describes the VRRP General Configuration controls:
Table 167 VRRP General Configuration controls
Control Descriptions
VRRP Processing Enabled? Globally enables or disables VRRP processing.
VRRP virtual router tracking
increment (0-254)
Defines the priority increment value (1 through 254) for virtual routers in master mode
detected on this switch. The default value is 2.
VRRP IP interface tracking
increment (0-254)
Defines the priority increment value (1 through 254) for active IP interfaces detected on
this switch. The default value is 2.
VRRP VLAN switch port tracking
increment (0-254)
Defines the priority increment value (1 through 254) for active ports on the virtual router’s
VLAN. The default value is 2.
VRRP Virtual Router Group Configuration
Virtual Router Identifier (1-255) Assigns a numeric identifier to the virtual router group.