ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Dashboard 19
The following table describes the Switch Dashboard controls:
Table 3 Switch Dashboard controls
Control Description
Switch Name Displays the name of the switch, as entered in Configuration > Switch > General
(SNMP).
Switch Location Displays the location of the switch, as entered in Configuration > Switch > General
(SNMP).
Switch Type Displays the type of switch.
Rack ID Displays the serial number of the chassis in which the switch resides.
Rack Name Displays the name of the chassis in which the switch resides.
Enclosure Displays the serial number of the enclosure (or “bay”) in which the switch resides.
Enclosure Name Displays the name of number of the enclosure (or “bay”) in which the switch resides.
Slot Displays the slot in which the switch resides.
Switch Up Time Displays the amount of time the switch has been running.
Last Boot Time Displays the date and time of last switch boot.
Time and Date Displays the current time and date settings on the switch.
Daylight Savings Location Displays the time zone where the switch resides. You are prompted to select your
location (continent, country, region) by the timezone wizard. Once a region is selected,
the switch updates the time to reflect local changes to Daylight Savings Time, etc.
MAC Address Displays the MAC Address of the switch management processor.
IP Address Displays the IP address of IP Interface 1.
Hardware Revision Displays the hardware revision number of the switch.
Switch Serial No Displays the serial number of the switch.
Hardware Part No Displays the part number of the switch hardware.
HW Spare Part No Displays the part number of spare switch hardware.
Interconnect Module Part No Displays the part number of the interconnect module, if applicable.
Interconnect Spare Part No Displays the part number of the spare interconnect module, if applicable.
OctalFC Module Part No Displays the part number of the OctalFC Module, if applicable.
OctalFC Spare Part No Displays the part number of the spare OctalFC module, if applicable.
Software Rev Displays the software revision number.
Banner Displays the login banner text. When a user or administrator logs into the switch, the
login banner is displayed.
It is also displayed as part of the output from the
/info/sys/gen command.