ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 190
The following table describes the Domain Name System Configuration controls:
Table 168 Domain Name System Configuration controls
Control Description
Primary IP Address Sets the IP address for your primary DNS server. Use dotted decimal notation.
Secondary IP Address Sets the IP address for your secondary DNS server. If the primary DNS server fails, the
configured secondary will be used instead. Enter the IP address using dotted decimal
notation.
Default Domain Name Sets the default domain name used by the switch. For example: mycompany.com.
Bootstrap Protocol Relay Configuration
To display the following form, select Layer 3 > Bootstrap Protocol Relay.
The following table describes the Bootstrap Protocol Relay configuration controls:
Table 169 Bootstrap Protocol Relay Configuration controls
Control Description
BOOTP Server IP Address Sets the IP address of the BOOTP server.
Secondary BOOTP Server IP
Address
Sets the IP address of the secondary BOOTP server.
BOOTP State Enables or disables the use of BOOTP. If you enable BOOTP, the GbE2 Interconnect Switch
will query its BOOTP server for all of the GbE2 Interconnect Switch IP parameters. The
default is enable.