ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Configuring the switch 191
IP Routing General Configuration
To display the following form, select Layer 3 > General.
The following table describes the IP Routing General Configuration controls:
Table 170 IP Routing General Configuration controls
Control Description
IP Forwarding Enabled? Enables or disables IP Forwarding.
Enable Forwarding Directed
Broadcasts?
Enables or disables forwarding directed broadcasts.
IP Destination Re-ARP Interval
(2-120 minutes)
Sets the re-ARP period in minutes. The switch periodically sends ARP (Address Resolution
Protocol) requests to refresh its address database. This command is used for setting the
interval between ARP refreshes of the next IP address in the database. The default interval is
10 minutes.
Router ID Configures the router ID.
QoS Priority CoS Configuration
To display the following form, select QoS > 802.1p > Priority - CoS.
This form summarizes the QoS Priority – Class of Service parameters. Select a priority value to view the CoSQ
For Priority form.