ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Dashboard 26
Table 10 Port 802.1x Dashboard controls
Control Description
Backend Authentication State Displays the Backend Authentication State. The Backend Authentication state can be one
of the following:
• request
• response
• success
• fail
• timeout
• idle
Reset Re-initializes the 802.1x access-control parameters for the port. The following actions take
place, depending on the 802.1x port configuration:
•
force unauth: the port is placed in unauthorized state, and traffic is blocked.
• auto: the port is placed in unauthorized state, then authentication is initiated.
• force auth: the port is placed in authorized state, and authentication is not
required.
Reauthenticate Re-authenticates the supplicant (client) attached to the port. This command only applies if
the port’s 802.1x mode is configured as
auto.
VLANs Dashboard
To display the following form, select Layer 2 > Virtual LANS (click the underlined text, not the folder).
This form displays information for all configured VLANs and all member ports that have an active link state.